Daimler Trucks North America and Paccar Inc. are recalling a combined 4,832 model-year 2027 trucks because a driveline built by Cummins-Meritor may be missing a small snap ring in its slip yoke assembly, according to recall documents filed with the National Highway Traffic Safety Administration (NHTSA). Without that ring, a bearing cup can separate from the driveline, the driveline itself can separate from the truck, the vehicle can lose drive power, and detached parts can become a road hazard for everyone behind it.
Source: Commercial Carrier Journal, reporting NHTSA recall documents
The Daimler recall: 3,894 Freightliner and Western Star trucks
Daimler's campaign is the larger of the two. It covers 3,894 model-year 2027 trucks: the Western Star 49X and 47X, the Freightliner Cascadia Fifth Gen and Cascadia, and the Freightliner 114SD, Business Class M2 and 108SD, CDLWire reported from the recall documents. The Cascadia is one of the most common long-haul tractors on North American highways, and the vocational models on the list are widely used in construction, delivery and municipal work, so the recall reaches far beyond a single fleet or region.
Source: CDLWire, reporting Overdrive and NHTSA documents
For Daimler owners, Cummins will inspect the driveline and replace it as necessary, free of charge. Owner notification letters are expected to be mailed on January 5, 2027. Owners can contact Daimler Trucks North America customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. Daimler's own number for this recall is F1046, and NHTSA's campaign number is 26V-737.
The Paccar recall: 938 Kenworth trucks
Paccar's campaign covers 938 model-year 2027 Kenworth trucks — the T280, T380, T680, T880 and W990 — built with the same Cummins-Meritor driveline. Kenworth dealers will inspect and replace the driveline as necessary, free of charge. Owner letters are expected to be mailed on January 10, 2027, and owners may contact Kenworth customer service at 1-425-828-5888 with recall number 26PACK. NHTSA's campaign number is 26V-743.
Why one missing ring can stop a truck
The slip yoke is a sliding joint that lets the driveshaft change length as the truck's suspension moves. The snap ring is the small retaining part that is supposed to hold that joint's bearing cup in place. Recall documents say that if the ring is missing, the bearing cup can separate from the driveline — and a driveline separation can cause a loss of drive power and leave detached components on the roadway in front of following traffic, NHTSA documents state. Every truck in both campaigns is a model-year 2027 unit, the newest equipment either manufacturer sells.
The truck campaigns follow an earlier Cummins recall of about 206 Meritor drivelines sold as replacement equipment, covering models including the RPL10, RPL14, RPL20, RPL25, RPL35 and 176MXL, with Cummins recall number AFT26001 and NHTSA campaign 26E077. In other words, the same missing-ring defect was first identified in replacement parts and has now been traced into brand-new trucks built with those drivelines.
A separate, much smaller Daimler label recall
The same recall documents include a separate Daimler campaign affecting just seven power units, in which the Gross Axle Weight Rating (GAWR) listed on the Federal Certification Label is incorrect, which could allow a vehicle to be overloaded and means the trucks do not comply with 49 CFR Part 567, 'Certification.' It covers certain 2020 Western Star 4900, 2024 Freightliner Cascadia and 2027 Western Star 49X trucks. Daimler said a dealer phone call in late October 2026 first flagged the error, it opened a case on October 30, confirmed its database did not match the intended GAWR on seven vehicles, and voluntarily recalled them on November 4. Daimler said it is not aware of any warranty claims, field reports or safety-related outcomes from the label issue. The remedy is still under development; letters are expected January 5, 2027, under Daimler number F1045 and NHTSA campaign 26V-736.
Do not wait for the January letters. If you own, lease or are about to take delivery of a listed model-year 2027 Freightliner, Western Star or Kenworth truck, check the truck's 17-character VIN against NHTSA campaigns 26V-737 and 26V-743 now, and confirm the campaign status before the truck is put in service. The inspection and any driveline replacement under both driveshaft campaigns are free of charge.
For Punjabi and other diaspora truckers and small fleet owners — who run Cascadias and Kenworths in large numbers on corridors such as I-5, I-80 and I-40 — the practical risk is timing: many of these 2027 trucks are only now entering service, and a truck sidelined for a driveline inspection loses earning days. Checking the VIN at delivery, rather than after a driveline problem appears on the highway, is the cheapest protection the recall documents themselves point to.
What happens next: owner letters go out on January 5, 2027 for Daimler trucks and January 10, 2027 for Kenworth trucks, VINs become searchable in NHTSA's recall database, and dealers and Cummins carry out the free inspections and replacements. No crash or injury caused by this defect has been reported in the recall coverage reviewed for this story, and this report will be updated if NHTSA or the manufacturers add vehicles or change the remedy.
